CBGserie
INDUSTRIAL AIR CONDITIONERS HEAVY DUTY FOR OPERATOR’S CABIN AND CONTROL ROOM
COOLING CAPACITY
RANGE
REFRIGERANT
INDUSTRY
APPLICATION
STANDARD FEATURES
The CBG air conditioners are developed in a compactconstruction and designed for the thermoregulation of operator cabins, electrical rooms and containers.
Are suitable for installation on mobile stations, cranes and maneuvering stages, placed in environments with high temperature and dust concentration or aggressive atmospheres.
Thanks to Refrind’s experience, CBG air conditioners result in reliable, sturdy, easy and reduced in maintenance products, therefore suitable for operation in particularly harsh conditions.
packaged compact frame with vertical construction, suitable for wall mount
housing made in high thick steel, RAL5010 powder painted with textured finishing
easy access for service and maintenance through front removable panels
lifting eyebolts for easy handling
finned heat exchangers, composed of high thickness copper tubes and aluminium fins, with wide fin spacing to avoid the dirt accumulation
air condensation with forced ventilation
HFC refrigerant fluid with low environmental impact:
- mod. CBG 18: R407C
- mod. CBG 20 – 100: R134a
compressor with anti-vibrating dampers:
- mod. CBG 18 – 62: hermetic compressor
- mod. CBG 100: SCROLL® compressor
refrigerant circuit made of fine alloys brazed copper tubes, equipped with expansion device, dryer filter, high and low pressure switch. Tubes arrangement allows the air conditioners to operate on high vibrating cranes
on-board power panel with easy access to internal parts, complete of all devices needed to a safe and autonomous operation
electro-mechanical consolle for management of cooling and heating functions, summer and winter mode selection; the consolle is positioned on recirculation airside
standard signals: general alarm, high temperature alarm
high pressure recirculation centrifugal fans with double speed (except for CBG 18-20-100)
condenser axial fans, with condensation control
synthetic media washable air filter, on recirculation air side possibility of air distribution through duct (starting from CBG 30)
CBMserie
IDUSTRIAL AIR CONDITTIONERS ROOFED FOR POWER PANELS AND ELECTRICAL ROOMS – HEAVY DUTY
COOLING CAPACITY
RANGE
REFRIGERANT
INDUSTRY
APPLICATION
STANDARD FEATURES
The CBM air conditioners are designed for the thermoregulation of operator cabin and electrical rooms in general.
Are suitable for installation in the most harsh environment of the industry as moving cranes, bulky material handling lines and in all application where present high vibration or
extreme temperature.
Thanks to Refrind’s experience, CBM air conditioners result in reliable, sturdy, easy and reduced in maintenance products, therefore suitable for operation in particularly harsh conditions.
packaged frame with compact construction, suitable for roof top installation
housing made in high thickness steel, RAL5010 powder painting with textured finishing
easy service access thanks to lateral removable panels
lifting eyebolts for easy handling
finned heat exchangers, composed of high thickness copper tubes and aluminium fins, with wide fin spacing to avoid the accumulation of dirt
air condensation with forced ventilation
HFC R134a refrigerant fluid with low environmental impact
SCROLL® compressor with anti- vibrating dampers
refrigerant circuit made of fine alloys brazed copper tubes, equipped with expansion device, dryer filter, high and low pressure switch
piping specific arrangement to allow operation in high vibrating and accelerating application
on-board factory wired power panel with easy access to internal parts. It comprehend all devices necessary to the autonomous and safe operation
electronic controller inside AC unit for the management of cooling and heating (optional) function
standard signals: general alarm, high temperature alarm, remote ON/OFF enable
external axial fans, with condensation control
high head centrifugal recirculating fans
possibility of air distribution through duct
CBRserie
INDUSTRIAL AIR CONDITIONER HEAVY DUTY SPLIT TYPE FOR OPERATOR’S CABIND AND ELECTRICAL ROOMS
COOLING CAPACITY
RANGE
REFRIGERANT
INDUSTRY
APPLICATION
STANDARD FEATURES
The CBR series air conditioners have been developed for the climate control of operator cabins, process control rooms and electrical rooms placed in harsh industrial installations; with dusty and aggressive atmosphere or extreme temperatures such as mobile cranes for the steel industry, mineral handling lines or any other application of such requirements.
The air conditioners are split type, made up of two units: moto-condensing unit of different sizes to which different types of evaporator units can be combined, for wall or ceiling mount, with direct or ducted air circulation.
Thanks to Refrind’s experience, CBR air conditioners result in reliable, sturdy, easy and reduced in maintenance products, therefore suitable for operation in particularly harsh conditions.
MOTO-CONDENSING UNIT (CBR SERIES)
frame suitable for ground installation
bearing frame made of high thickness steel, RAL5010 blue
powder painting with textured finishing
easy service access thanks to lateral removable panels
lifting eyebolts for easy handling
condenser coil made of high thickness copper tubes and aluminium fins, assembled with wide fin spacing to avoid accumulation of dirt
suitable for outdoor installation
air condensed type with four side air suction and upward discharge of heat
full charge of HFC R134a refrigerant fluid with low environmental impact
SCROLL® compressor on anti-vibrating dampers, suitable for high c0pression ratio
refrigerant circuit made of fine alloys brazed copper tubes, equipped with lamination device, dehydrator filter, high and low pressure switch and condensation control
pipes arrangement allows the unit to operate on high vibrating cranes
on board watertight power panel containing safety and control devices of the machinery, complete of terminals strip and thermo-magnetic protections
axial fans, with condensation control
EVAPORATING UNIT
frame suitable for wall installation (WD and WU series) or ceiling mounting (CS and CD series)
housing made in steel thick plate, RAL5010 powder painting with textured finishing
easy access to internal components for maintenance activity through removable panels
lifting eyebolts for easy handling
evaporator coil made of high thickness copper tubes and aluminium fins, assembled with wide fin spacing to avoid accumulation of dirt
stainless steel tray for condensate recovery
refrigerant circuit made of fine alloys brazed copper tubes, equipped with thermostatic valve. Pipes arrangement allows the unit to operate on high vibrating stages
electronic controller with panel mount display for the control of cooling function or also dehumidification and heating (optional)
radial or centrifugal high-pressure fans air filters on recirculation possibility to connect to air distribution system (CWU e CCD series)
CBTserie
INDUSTRIAL AIR CONDITIONERS HEAVY DUTY FOR POWER PANELS AND ELECTRICAL ROOMS
COOLLING CAPACITY
RANGE
REFRIGERANT
INDUSTRY
APPLICATION
STANDARD FEATURES
The CBT air conditioners are designed for the thermoregulation of automation panels and electrical rooms in general.
Are suitable for installation in the most harsh environment of the industry as moving cranes, bulky material handling lines and in all application where present high dusty or corrosive atmosphere, high vibration or extreme temperature.
Thanks to Refrind’s experience, CBT air conditioners result in eliable, sturdy, easy and reduced in maintenance products, therefore suitable for operation in particularly harsh conditions.
packaged frame with compact construction, suitable for ground installation and duct connection
housing made in thick steel plate, RAL5010 powder painting with textured finishing
easy service access thanks to frontal removable panels
lifting eyebolts for easy handling
suitable for outdoor installation
finned heat exchangers, composed of high thickness copper tubes and aluminium fins, with wide fin spacing to avoid the accumulation of dirt
air condensation with forced ventilation
HFC R134a refrigerant fluid with low environmental impact
SCROLL® compressor with anti-vibrating dumpers
refrigerant circuit made of fine alloys brazed copper tubes, equipped with lamination device, dryer filter, high and low pressure switch
piping specific arrangement to allow operation in high vibrating and accelerating application
on-board factory wired power panel with easy access to internal parts. It comprehend all devices necessary to the autonomous and safe operation
electronic controller inside AC unit for the management of cooling and heating (optional) function
standard signals: general alarm, high temperature alarm, remote ON/OFF enable
condenser axial fans, with condensation control
high head recirculating fans:
- mod. CBT 602 – 103: axial fans
- mod. CBT 153 – 203 : centrifugal fans
high flexibility for air handling thanks to the multiple accessories and duct connection
CDHserie
INDUSTRIAL AIR CONDITIONERS FOR POWEL PANELS AND ELECTRICAL CONTAINERS – HEAVY DUTY
COOLER CAPACITY
RANGE
REFRIGERANT
INDUSTRY
APPLICATION
STANDARD FEATURES
The CDH air conditioners are designed for the thermoregulation of automation panels and electrical shelters in general. Are suitable for installation in the most harsh environment of the industry as moving cranes, bulky material handling lines and in all application where present
high dusty or corrosive atmosphere, high vibration or extreme temperature.
Thanks to Refrind’s experience, CDH air conditioners result in reliable, sturdy, easy and reduced in maintenance products, therefore suitable for operation in particularly harsh conditions.
packaged frame with vertical construction, suitable for installation on electrical board external side:
- mod. CDH 10-28: wall fixing
- mod. CDH 30-40: ground or wall fixing
housing made in thick steel plate, powder painted:
- mod. CDH 10-28: RAL7035 with textured finishing
- mod. CDH 30-40: RAL5010 with textured finishing
easy servis access to internal parts through removable panels
lifting eyebolts for easy handling
designed for outdoor installation exposed to weathering
finned heat exchangers, composed of high-thickness copper tubes and thick aluminium fins, with wide fin spacing to avoid the accumulation of dust
air condensed with forced ventilation
HFC refrigerant fluid with low environmental impact
hermetic compressor with anti-vibrating dampers
refrigerant circuit made of fine alloys brazed copper tubes, equipped with lamination device, dryer filter, high and low pressure switches (CDH10-20 only high pressure sw.). Pipingarrangement allows the air conditioners to operate on high vibrating stages
on-board power panel with easy access to internal parts,complete of all devices needed to a safe and autonomous operation
electronic controller, for cooling and heating control:
- mod. CDH C10-28: the controller is positioned on recirculation air side (operable from electrical board internal side)
- mod. CDH C30-40: the controller is positioned on condensation air side (operable from electrical board external side)
standard signals: general alarm, high temperature alarm, remote ON/OFF enable
external centrifugal fans, with condensation control
high pressure recirculating fan, centrifugal type
CMDserie
INDUSTRIAL AIR CONDITIONERS FOR OPERATOR’S CABIN AND CONTROL ROOM – HEAVY DUTY
COOLING CAPACITY
RANGE
REFRIGERANT
INDUSTRY
APPLICATION
STANDARD FEATURES
The CMD air conditioners are developed in a compact construction and designed for the thermoregulation of operator cabins, electrical rooms and containers. Are suitable for installation on mobile stations, cranes and maneuvering stages, placed in environments with high temperature and
dust concentration or aggressive atmospheres.
Thanks to Refrind’s experience, CMD air conditioners result in reliable, sturdy, easy and reduced in maintenance products, therefore suitable for operation in particularly harsh conditions.
packaged frame with vertical construction, suitable for installation on cabin internal side, wall fixing
housing made in steel with RAL9010 powder painting and
textured finishing
easy service access through single front removable panel
lifting eyebolts for easy handling suitable for weathering exposure (with optional anti-rain kit)
finned heat exchangers, composed of high thickness copper tubes and aluminium fins, with wide fin spacing to avoid the accumulation of dust
electrical heating as standard composed by armored elements made of steel finned tube, comprehended high limit safety thermostat
air condensation with forced ventilation
HFC refrigerant fluids with low environmental impact
hermetic rotative compressor with anti-vibrating dampers (hermetic piston type for versions “Y” and “H”)
refrigerant circuit made of fine alloys brazed copper tubes, equipped with lamination device, dryer filter, high pressure switch. Tubes arrangement allows the air conditioners to operate on high vibrating cranes
on-board factory wired power panel with easy access to internal parts. It comprehend all devices necessary to the autonomous and safe operation
electronic user controller for management of cooling and heating (optional); the controller is positioned internally on user’s consolle
standard signals: general alarm, high temperature alarm
high head centrifugal fans, with condensation control
recirculation air filter, consisting of synthetic media washable membrane, G4 filter class
CPRMserie
INDUSTRIAL AIR CONDITIONERS WITH INTEGRATED PRESSURIZATION SYSTEM – HEAVY DUTY
COOLING CAPACITY
RANGE
REFRIGERANT
INDUSTRY
APPLICATION
STANDARD FEATURES
CPRM units are designed for operator cabins, electrical rooms and containers thermoregulation, for installation on mobile stations, cranes and maneuvering stages, placed in environments with high temperature, dusty and aggressive atmospheres.
They are equipped with pressurization and filtration system with automatic cleaning system that reduces maintenance. Thanks to Refrind’s experience, CPRM air conditioners are reliable, sturdy, easy and reduced maintenance products, therefore they are suitable for operation in particularly harsh conditions.
packaged frame with vertical construction, suitable for ground installation
housing made in thick steel plate, RAL5010 powder painted with textured finishing
easy service access through frontal removable panels
lifting eyebolts for easy handling
suitable for outdoor installation, roofed
finned heat exchangers, composed of high thickness copper tubes and aluminium fins, with wide fin spacing to avoid the accumulation of dust
air condensation with forced ventilation
HFC R134a refrigerant fluid with low environmental impact
hermetic compressor (PRM302) or semi-hermetic compressor (PRM502) with anti-vibrating dampers
refrigerant circuit made of copper tubes, brazed with fine alloys and equipped with lamination device, dryer filter, high and low pressure switch. Tubes arrangement allows the air conditioners to operate on high vibrating equipment
on-board factory wired power panel with easy access to internal parts. It comprehend all devices necessary to the autonomous and safe operation
remote consolle, equipped with an electronic controller for cooling and heating (optional) control
standard signals: general alarm, high temperature alarm, remote ON/OFF enable
heating function made of electrical elements made of carbon steel finned tube, provided of safety thermostat (optional)
condenser axial fans, with condensation control
cartridge polyester air suction filter, with filtration capacity of 1 µm (≥99%)
filter auto-cleaning system, Pulse-Jet type. It’s composed by air compressor, stainless steel air storage, overpressure safety valve and a temporized injection valve
high head pressurization centrifugal fan
recirculation centrifugal fan (optional)
class “H” filtering stage on air delivery (optional)
PRFserie
PRESSURIZATION AND FILTRATION SYSTEM WITH MULTISTAGE FILTRATION
AIR FLOW
FILTRATION
FILTER’S CLEANING
INDUSTRY
APPLICATION
STANDARD FEATURES
The pressurization units of PRF series are capable of providing continuous ventilation to premises or cabinets places in environments with high concentration of dust; thanks to the integrated filtering modules, they guarantee clean air for the personnel or for electro/electronic automation devices.
These machines are characterized by great flexibility and customization thanks to a large range of available filters.
Refrind’s long experience allowed to develop an effective and reliable roduct suitable to fit the most demanding applications of the industry.
vertical compact construction for wall or roof installation
housing made in carbon steel, RAL9010L
easy access to internal parts through front removable panel
adjustable damper for the air flow
upgradable and customizable filtering stages
centrifugal type fan, dynamically balanced
direct air distribution or through duct connected to the premise
panel in watertight execution, factory wired and complete of all devices necessary to autonomous and safe operation
power supply and signals connections available on terminals
differential pressure switch for filter state monitoring
PRSserie
PRESSURIZZATION AND FILTRATION SYSTEM WITH SELFCLEANING FILTERS
AIR FLOW
FILTRATION
FILTER’S CLEANING
INDUSTRY
APPLICATION
STANDARD FEATURES
The pressurization units of PRS series are capable of providing continuous ventilation to premises or cabinets places in environments with high concentration of dust; thanks to the integrated filtering modules, they guarantee clean air for the personnel or for electro/electronic automation devices.
These machines are characterized by the integrated automatic filter cleaning system based on Pulse-Jet technology, compared to the common filtration modules, this added value involves an extreme reduction of the maintenance interventions.
Refrind’s long experience allowed to develop an effective and reliable product suitable to fit the most demanding applications of the industry.
vertical construction made of varnished steel RAL5015
wall mount installation or stand alone with duct
easy access to internal parts through lateral panels
filtering cartridge protected by removable grids
suitable for roofed installation
centrifugal fan with forward–curved blades with double impeller, dynamically balanced. motor with two speeds
adjustable damper for air volume regulation
direct air distribution or through duct connected to the premise
panel in watertight execution, factory wired and complete of all devices necessary to autonomous and safe operation
power supply and signals connection terminals available inside panel
double cartridge type filter suitable for reverse-jet cleaning system
reverse cleaning system based on Pulse-Jet technology,provided of air storage, piston compressor, cleaning and condensate draining valves
independent adjustable conveyor
PRTserie
PRESSURRIZATION AND FILTRATION SYSTEM WITH SELF CLEANING FILTERS
AIR FLOW
FILTRATION
FILTER’S CLEANING
INDUSTRY
APPLICATION
STANDARD FEATURES
The pressurization units of PRT series are capable of providing continuous ventilation to premises or cabinets placed in environments with high concentration of dust; thanks to the integrated filtering modules, guarantee clean air for the personnel and automation equipment.
These machines are characterized by the integrated automatic filter cleaning system based on Pulse-Jet technology, compared to the common filtration modules, this added value involves an extreme reduction of the maintenance interventions.
Refrind’s long experience allowed to develop an effective and reliable product suitable to fit the most demanding applications of the industry.
svertical construction made of varnished steel RAL5010
wall mount installation or stand alone with duct
expressly developed to integrate CBT air conditioning units
easy access to internal parts through lateral panels
power panel accessible on the front side
filtering cartridge protected by removable grids
suitable for roofed installation
panel in watertight execution, factory wired and complete of all devices necessary to autonomous and safe operation
power supply and signals connection terminals available inside panel
centrifugal fan with backward–curved blades, dynamically balanced with 2800rpm
adjustable damper for air volume regulation
direct air distribution or through duct connected to the premise
cartridge type primary filter suitable for reverse-jet cleaning system
additional filtering module, plate type (optional)
reverse cleaning system based on Pulse-Jet technology, provided of air storage, piston compressor, cleaning and condensate draining valves
RAKserie
INDUSTRIAL REFRIGERATOR 19” SLIDE-IN RACK CHILLERS
COOLING CAPACITY
RANGE
PRECISION
INDUSTRY
APPLICATION
STANDARD FEATURES
The construction of RAK refrigerating units is specifically made for easy installation in standard Rack 19” cabinets. Are provided of circulating pump, inertial water storage and comprehend al devices necessary to a safe and autonomous operation.
The chillers of RAK series are able to guarantee high precision control with accuracy up to +/-0,1K.
The rich basic equipment, comprehensive of double level sensor, pressure switches, multiple temperature thresholds, allow a high protection of itself and the user’s application at the same time.
package construction chiller with compact for installation into standard 19” Rack cabinets
housing made in varnished steel with front panel in RAL9005 textured color (black)
easy service access through a single removable cover
axial type motor fan, dynamically balanced
air condensation with forced ventilation
HFC/HFO refrigerant fluid with low enviromental impact
hermetic piston type compressor mounted on anti-vibration dampers
condenser coils made in varnished steel or copper aluminium
immersion evaporator coil made in stainless steel
electronic control of temperature with accuracy +/-0,1K ÷ +/-0,5K (steady ÷ variable load)
on-board power panel with dedicated electronic board
front side user’s console with main switch and controller’s display
power supply:
- panel mount Iec connector 2P + PE for RAK601-202
- terminals in power panel with cable gland per RAK582
signals available on panel mount circular connector:
- general alarm
- remote ON/OFF enable
suitable for the circulation of water and water/glycol mixture
panel mount gauge for working pressure monitoring
circuit components made in NON-FERROUS materials
connections positioned on back side, female GAS threaded type, made in brass
recirculating pumps:
- mod.601-202: vane pump with adjustable bypass made in brass
- mod. 582: centrifugal immersion type made in brass
double stage level switch for pump protection
external visual level indicator
filling cap available on external side
RAWserie
AIR-TO-WATER COOLERS
COOLING CAPACITY
RANGE
PRECISION
INDUSTRY
APPLICATION
STANDARD FEATURES
The RAW series coolers stand out by their vertical construction with extreme compact format.
Are developed to implement applications in fields such as machine tools, lasers, plastics molding and industrial processes in general.
The RAW are designed to ensure maximum functionality and ease of use. Thanks to its experience, REFRIND could develop highly reliable coolers while ensuring excellent value for money.
package cooler with vertical compact construction
housing made in steel, RAL7012B painting with textured finish
easy service access through side removable panels
lifting eyebolts for easy handling
axial type fan dynamically balanced
designed for indoor installation
rubber feet
electromechanical thermostat +/-2k
on-board cabelling with easy access
front side consolle equipped with main switch and thermostat knob
power supply cord with schuko plug, 2,5m length
safety temperature switch on fluid for circuit and pump
protection against over-temperature
suitable for the circulation of water and water/glycol mixture
circuit components made in NON-FERROUS materials
back side hydraulic connections with female thread
peripheral pumps made in brass
external visual level indicator
fixed bypass for pump protection
filling cap easily accessible from the outside
internal drainage pipe with cap
RFLserie
INDUSTRIAL REFRIGERATORS INERTIAL STORAGE CHILLERS – ICE BANK CHILLERS
COOLING CAPACITY
RANGE
PRECISION
INDUSTRY
APPLICATION
STANDARD FEATURES
The RFL chillers are refrigerating stations for water and generic fluids with inertial storage. The inertial technology is based on the accumulation of ice which allow to bear peak loads higher than the nominal capacity of the chiller itself, therefore containing power consumption and the initial investment for the unit.
Designed to ensure maximum functionality and ease of use, can be used in several application of industry. Thanks to the intermediate exchanging coil made in stainless steel, are suitable for the circulation of food or aggressive chemical fluids without any sort of contamination.
The consolidated Refrind’s experience allowed to evolve in a reliable and accurate product while maintaining excellent value of money.
package chiller with vertical construction
housing made in steel, RAL7030 painting with textured finish
easy service access through removable panels
lateral handles for manual handling
axial type fan dynamically balanced
designed for indoor installation
air condensation with forced ventilation
HFO based refrigerant fluid with low environmental impact
hermetic compressor mounted on anti-vibration damper
condenser coils made with copper tubes and aluminium fins
immersed evaporator coil made in smooth copper pipe
electronic control of temperature with accuracy +/-2K
use’s consolle equipped with main switch and display
3,5 meters power cord with Schuko plug
suitable for the circulation of water, glycol and oils, with intermediate coil also aggressive and food fluids.
circuit components made in NON-FERROUS materials
quick type hydraulic connection
immersed type circulation pump made of plastic
visual level indicator
filling cap accessible from the outside
intermediate exchanging coils made in smooth stainless steel pipe (optional)
RFWserie 351-501
INDUSTRIAL REFRIGERATORS DESKTOP MICRO-CHILLER
COOLING CAPACITY
RANGE
PRECISION
INDUSTRY
APPLICATION
STANDARD FEATURES
The RFW series chillers stand out by their ultra-compact dimension and versatility use.
These chillers are complete of all devices necessary to the autonomous operation and comprehend inertial storage tank an immersion type pump. Developed to ensure maximum functionality and ease of use, offer several option and accessories which allow their use in most applications of industry and not only.
The high accuracy version gives increased stability in order to fulfill the most demanding applications.
The consolidated Refrind’s experience allowed to evolve in a reliable and accurate product while maintaining excellent value of money.
compact construction for desk installation
housing made in steel, RAL5010/7035 painting with textured finish
easy service access through removable panels
designed for indoor installation
air condensation with forced ventilation
HFC refrigerant fluid with low environmental impact
hermetic compressor mounted on anti-vibration damper
condenser coils made in steel with varnishing
immersed cooling coil made in AISI316 smooth tube
temperature control with +/-2 K stability
front side user’s console with main switch and controller’s display
power cord with 2,5m length and Schuko plug
suitable for the circulation of normal water, deionized and glycol mixture
circuit components made of plastic and stainless steel
hydraulic connections on lateral side, quick connection type
immersed type circulation pump without mechanical sealing, made of plastic
external visual level indicator and drainage
filling cap available from external side
RFW 352-253 serie
INDUSTRIAL REFRIGERATORS COMPACT VERTICAL
CAPACITY
RANGE
PRECISION
INDUSTRY
APPLICATION
STANDARD FEATURES
The RFW series chillers stand out by their compact dimension, versatility use and vertical construction. Designed to ensure maximum functionality and ease of use, the RFW offers great flexibility with availability of several optional and accessories which allow them to implement most of the industrial application and not only.
Choosing for the high accuracy version, are equipped with a base rich equipment, comprehensive of double level sensor, pressure switches, multiple temperature thresholds which allow to reach high level of reliability and protection for the chiller itself and for the user’s application.
Thanks to Refrind’s experience, the RFW series evolved in a reliable and accurate product while maintaining excellent value of money.
struttura monoblocco con sviluppo verticale compatto
carpenteria in acciaio verniciato a polveri RAL7024 bucciato
facile accesso alle parti interne attraverso i pannelli laterali e superiori
anelli di sollevamento per una facile movimentazione
ventilatori assiali dinamicamente bilanciati
idonea per installazione al coperto
basamento idoneo al sollevamento con carrello
air condensation with top side discharge
HFC refrigerant fluid with low environmental impact
compressor mounted on anti-vibration feet:
- mod. ≤602 hermetic piston
- mod. ≥752 hermetic scroll
condenser coils made with copper tubes and aluminium fins
evaporator made in stainless steel:
- mod. ≤602 immersed coil
- mod. ≥752 brazed plate
electronic control of temperature with accuracy +/-2K (high accuracy on request)
on-board power panel with easy access to internal electrical parts
front side user’s console with main switch and controller’s display
power supply and signals connections available on terminals inside power panel
standard signals: general alarm, H/L temperature alarm, remote ON/OFF enable
suitable for the circulation of water and water/glycol mixture
panel mount gauge for working pressure monitoring
circuit components made in NON-FERROUS materials
connections positioned on back side, female GAS threaded type, made in brass
recirculating pumps:
- mod. ≤602 Vane type made in brass with adjustable bypass
- mod. ≥752 Centrifugal in stainless steel
- mod. ≥ 193: Centrifugal type multistage
external visual level indicator
filling cap available on external side
fixed bypass for pump protection
RWOserie
INDUSTRIAL REFRIGERATORS
COOLING CAPACITY
RANGE
PRECISION
INDUSTRY
APPLICATION
STANDARD FEATURES
The RWO series chillers stand out by their compact dimension and horizontal format.
Designed to ensure maximum functionality and ease of use, the RWO offers great flexibility with availability of several optional and accessories which allow them to implement most of the industrial application and not only.
Thanks to the Refrind’s experience, it was possible to develop highly reliable chillers while ensuring excellent value for money.
package chiller with horizontal compact construction
housing made in steel, RAL7035B painting with textured finish
easy service access through lateral and top side removable panels
lifting eyebolts for and easy handling
axial type fan dynamically balanced
designed for indoor installation
air condensation with back side discharge
HFC refrigerant fluid with low environmental impact
compressor mounted on anti-vibration damper
- single-phases versions with hermetic rotary type
- three-phases versions with hermetic piston type
condenser coils made with copper tubes and aluminium fins
evaporator made in stainless steel, immersed tube type
figh refrigerant pressure switch
electronic control of temperature with accuracy +/-2K
on-board power panel with easy access to internal electrical parts
front side panel equipped with main switch and controller
cabled power cord with free-end, 2,5m length
signals connections available on internal terminals
standard signals: general alarm contact (high press., H/L temp.), remote ON/OFF
suitable for the circulation of water and water/glycol mixture
panel mount pressure gauge (pulse insensitive)
circuit components made in NON-FERROUS materials
connections positioned on back side, female GAS threaded
type, made in brass
rotary vane pump, brass made, with adjustable bypass
visual level indicator
filling cap accessible from the outside
fixed by-pass between delivery and return