CBGserie
INDUSTRIAL AIR CONDITIONERS HEAVY DUTY FOR OPERATOR’S CABIN AND CONTROL ROOM
COOLING CAPACITY
RANGE
REFRIGERANT
INDUSTRY
APPLICATION
STANDARD FEATURES
The CBG air conditioners are developed in a compactconstruction and designed for the thermoregulation of operator cabins, electrical rooms and containers.
Are suitable for installation on mobile stations, cranes and maneuvering stages, placed in environments with high temperature and dust concentration or aggressive atmospheres.
Thanks to Refrind’s experience, CBG air conditioners result in reliable, sturdy, easy and reduced in maintenance products, therefore suitable for operation in particularly harsh conditions.
packaged compact frame with vertical construction, suitable for wall mount
housing made in high thick steel, RAL5010 powder painted with textured finishing
easy access for service and maintenance through front removable panels
lifting eyebolts for easy handling
finned heat exchangers, composed of high thickness copper tubes and aluminium fins, with wide fin spacing to avoid the dirt accumulation
air condensation with forced ventilation
HFC refrigerant fluid with low environmental impact:
- mod. CBG 18: R407C
- mod. CBG 20 – 100: R134a
compressor with anti-vibrating dampers:
- mod. CBG 18 – 62: hermetic compressor
- mod. CBG 100: SCROLL® compressor
refrigerant circuit made of fine alloys brazed copper tubes, equipped with expansion device, dryer filter, high and low pressure switch. Tubes arrangement allows the air conditioners to operate on high vibrating cranes
on-board power panel with easy access to internal parts, complete of all devices needed to a safe and autonomous operation
electro-mechanical consolle for management of cooling and heating functions, summer and winter mode selection; the consolle is positioned on recirculation airside
standard signals: general alarm, high temperature alarm
high pressure recirculation centrifugal fans with double speed (except for CBG 18-20-100)
condenser axial fans, with condensation control
synthetic media washable air filter, on recirculation air side possibility of air distribution through duct (starting from CBG 30)
CBRserie
INDUSTRIAL AIR CONDITIONER HEAVY DUTY SPLIT TYPE FOR OPERATOR’S CABIND AND ELECTRICAL ROOMS
COOLING CAPACITY
RANGE
REFRIGERANT
INDUSTRY
APPLICATION
STANDARD FEATURES
The CBR series air conditioners have been developed for the climate control of operator cabins, process control rooms and electrical rooms placed in harsh industrial installations; with dusty and aggressive atmosphere or extreme temperatures such as mobile cranes for the steel industry, mineral handling lines or any other application of such requirements.
The air conditioners are split type, made up of two units: moto-condensing unit of different sizes to which different types of evaporator units can be combined, for wall or ceiling mount, with direct or ducted air circulation.
Thanks to Refrind’s experience, CBR air conditioners result in reliable, sturdy, easy and reduced in maintenance products, therefore suitable for operation in particularly harsh conditions.
MOTO-CONDENSING UNIT (CBR SERIES)
frame suitable for ground installation
bearing frame made of high thickness steel, RAL5010 blue
powder painting with textured finishing
easy service access thanks to lateral removable panels
lifting eyebolts for easy handling
condenser coil made of high thickness copper tubes and aluminium fins, assembled with wide fin spacing to avoid accumulation of dirt
suitable for outdoor installation
air condensed type with four side air suction and upward discharge of heat
full charge of HFC R134a refrigerant fluid with low environmental impact
SCROLL® compressor on anti-vibrating dampers, suitable for high c0pression ratio
refrigerant circuit made of fine alloys brazed copper tubes, equipped with lamination device, dehydrator filter, high and low pressure switch and condensation control
pipes arrangement allows the unit to operate on high vibrating cranes
on board watertight power panel containing safety and control devices of the machinery, complete of terminals strip and thermo-magnetic protections
axial fans, with condensation control
EVAPORATING UNIT
frame suitable for wall installation (WD and WU series) or ceiling mounting (CS and CD series)
housing made in steel thick plate, RAL5010 powder painting with textured finishing
easy access to internal components for maintenance activity through removable panels
lifting eyebolts for easy handling
evaporator coil made of high thickness copper tubes and aluminium fins, assembled with wide fin spacing to avoid accumulation of dirt
stainless steel tray for condensate recovery
refrigerant circuit made of fine alloys brazed copper tubes, equipped with thermostatic valve. Pipes arrangement allows the unit to operate on high vibrating stages
electronic controller with panel mount display for the control of cooling function or also dehumidification and heating (optional)
radial or centrifugal high-pressure fans air filters on recirculation possibility to connect to air distribution system (CWU e CCD series)
CBTserie
INDUSTRIAL AIR CONDITIONERS HEAVY DUTY FOR POWER PANELS AND ELECTRICAL ROOMS
COOLLING CAPACITY
RANGE
REFRIGERANT
INDUSTRY
APPLICATION
STANDARD FEATURES
The CBT air conditioners are designed for the thermoregulation of automation panels and electrical rooms in general.
Are suitable for installation in the most harsh environment of the industry as moving cranes, bulky material handling lines and in all application where present high dusty or corrosive atmosphere, high vibration or extreme temperature.
Thanks to Refrind’s experience, CBT air conditioners result in eliable, sturdy, easy and reduced in maintenance products, therefore suitable for operation in particularly harsh conditions.
packaged frame with compact construction, suitable for ground installation and duct connection
housing made in thick steel plate, RAL5010 powder painting with textured finishing
easy service access thanks to frontal removable panels
lifting eyebolts for easy handling
suitable for outdoor installation
finned heat exchangers, composed of high thickness copper tubes and aluminium fins, with wide fin spacing to avoid the accumulation of dirt
air condensation with forced ventilation
HFC R134a refrigerant fluid with low environmental impact
SCROLL® compressor with anti-vibrating dumpers
refrigerant circuit made of fine alloys brazed copper tubes, equipped with lamination device, dryer filter, high and low pressure switch
piping specific arrangement to allow operation in high vibrating and accelerating application
on-board factory wired power panel with easy access to internal parts. It comprehend all devices necessary to the autonomous and safe operation
electronic controller inside AC unit for the management of cooling and heating (optional) function
standard signals: general alarm, high temperature alarm, remote ON/OFF enable
condenser axial fans, with condensation control
high head recirculating fans:
- mod. CBT 602 – 103: axial fans
- mod. CBT 153 – 203 : centrifugal fans
high flexibility for air handling thanks to the multiple accessories and duct connection
CDHserie
INDUSTRIAL AIR CONDITIONERS FOR POWEL PANELS AND ELECTRICAL CONTAINERS – HEAVY DUTY
COOLER CAPACITY
RANGE
REFRIGERANT
INDUSTRY
APPLICATION
STANDARD FEATURES
The CDH air conditioners are designed for the thermoregulation of automation panels and electrical shelters in general. Are suitable for installation in the most harsh environment of the industry as moving cranes, bulky material handling lines and in all application where present
high dusty or corrosive atmosphere, high vibration or extreme temperature.
Thanks to Refrind’s experience, CDH air conditioners result in reliable, sturdy, easy and reduced in maintenance products, therefore suitable for operation in particularly harsh conditions.
packaged frame with vertical construction, suitable for installation on electrical board external side:
- mod. CDH 10-28: wall fixing
- mod. CDH 30-40: ground or wall fixing
housing made in thick steel plate, powder painted:
- mod. CDH 10-28: RAL7035 with textured finishing
- mod. CDH 30-40: RAL5010 with textured finishing
easy servis access to internal parts through removable panels
lifting eyebolts for easy handling
designed for outdoor installation exposed to weathering
finned heat exchangers, composed of high-thickness copper tubes and thick aluminium fins, with wide fin spacing to avoid the accumulation of dust
air condensed with forced ventilation
HFC refrigerant fluid with low environmental impact
hermetic compressor with anti-vibrating dampers
refrigerant circuit made of fine alloys brazed copper tubes, equipped with lamination device, dryer filter, high and low pressure switches (CDH10-20 only high pressure sw.). Pipingarrangement allows the air conditioners to operate on high vibrating stages
on-board power panel with easy access to internal parts,complete of all devices needed to a safe and autonomous operation
electronic controller, for cooling and heating control:
- mod. CDH C10-28: the controller is positioned on recirculation air side (operable from electrical board internal side)
- mod. CDH C30-40: the controller is positioned on condensation air side (operable from electrical board external side)
standard signals: general alarm, high temperature alarm, remote ON/OFF enable
external centrifugal fans, with condensation control
high pressure recirculating fan, centrifugal type
CMDserie
INDUSTRIAL AIR CONDITIONERS FOR OPERATOR’S CABIN AND CONTROL ROOM – HEAVY DUTY
COOLING CAPACITY
RANGE
REFRIGERANT
INDUSTRY
APPLICATION
STANDARD FEATURES
The CMD air conditioners are developed in a compact construction and designed for the thermoregulation of operator cabins, electrical rooms and containers. Are suitable for installation on mobile stations, cranes and maneuvering stages, placed in environments with high temperature and
dust concentration or aggressive atmospheres.
Thanks to Refrind’s experience, CMD air conditioners result in reliable, sturdy, easy and reduced in maintenance products, therefore suitable for operation in particularly harsh conditions.
packaged frame with vertical construction, suitable for installation on cabin internal side, wall fixing
housing made in steel with RAL9010 powder painting and
textured finishing
easy service access through single front removable panel
lifting eyebolts for easy handling suitable for weathering exposure (with optional anti-rain kit)
finned heat exchangers, composed of high thickness copper tubes and aluminium fins, with wide fin spacing to avoid the accumulation of dust
electrical heating as standard composed by armored elements made of steel finned tube, comprehended high limit safety thermostat
air condensation with forced ventilation
HFC refrigerant fluids with low environmental impact
hermetic rotative compressor with anti-vibrating dampers (hermetic piston type for versions “Y” and “H”)
refrigerant circuit made of fine alloys brazed copper tubes, equipped with lamination device, dryer filter, high pressure switch. Tubes arrangement allows the air conditioners to operate on high vibrating cranes
on-board factory wired power panel with easy access to internal parts. It comprehend all devices necessary to the autonomous and safe operation
electronic user controller for management of cooling and heating (optional); the controller is positioned internally on user’s consolle
standard signals: general alarm, high temperature alarm
high head centrifugal fans, with condensation control
recirculation air filter, consisting of synthetic media washable membrane, G4 filter class
